Operational Access Description: The Crown Mine Site Is Approximately Located In The Southeast Section Of The City Of Timmins, Immediately North Of The Massive Hollinger Tailings Area.
2008 Amec Tailings Report Indicates The Crown Mine Tailings Area Is Likely A Section Of Tailings That Abuts The West Side Of The Vipond Tailings Deposit On The South Side Of Moneta Avenue. The Site Is Between A Hydro Sub-station And A Commercial Auto Collision Repair Business.
Hazard Feature Information
Mine Feature
Hazard Status
Condition
UTM Zone
Easting
Northing
Crown Pillar
Not Available
17
476707
5368388
Raise To Surface
Active
Fully Contained By Hollinger Mine Fencing That Must
Be Completed With Code-compliant 6-gauge Fencing
For Closure. Fenced Area Included As Part Of H14 Cp
17
476660
5368298
Raise To Surface
Active
Fully Contained By Hollinger Mine Fencing That Must
Be Completed With Code-compliant 6-gauge Fencing
For Closure. Fenced Area Included As Part Of H14 Cp
17
476675
5368390
Shaft - 1 Compartment - Vertical Shaft
Rehabilitated
Crown No. 1 Shaft
Capped To Code In 2001
November 9, 2000 Bhm # 00-386 For The
Crown #1 & #4 Shafts, Extendicare Shaft Caps
Confirms That A New Cap Was Designed And
Constructed As Per The Mndm Guidelines For
Rehabilitation Of Surface Mine Openings A
17
476575
5368440
Shaft - 1 Compartment - Vertical Shaft
Active
Crown No. 2 Shaft
Fully Contained By Hollinger Mine Fencing That Must
Be Completed With Code-compliant 6-gauge Fencing
For Closure. Reportedly Sealed With 24-inch Thick
Reinforced Concrete Plug In 1968. Fenced Area Included As Part Of H14 Cp
17
476691
5368402
Shaft - 1 Compartment - Vertical Shaft
Rehabilitated
Crown No. 4 Shaft
Capped To Code In 2001
November 9, Bhm # 00-386 For The Crown #1
& #4 Shafts, Extendicare Shaft Caps Confirms
That A New Cap Was Designed And Constructed
As Per The Mndm Guidelines For Rehabilitation
Of Surface Mine Openings And So
17
476493
5368459
Shaft - 1 Compartment - Vertical Shaft
Rehabilitated
Crown No. 5 Shaft
Fully Contained By Hollinger Mine Fencing That Must
Be Completed With Code-compliant 6-gauge Fencing
For Closure.
February 2004 Prr Bmh # 03-505 For The #5
Crown Shaft Confirms That A New Cap Was
Designed And Constructed As Per The
17
476778
5368189
Shaft - 4 Compartment - Incline Shaft
Rehabilitated
Crown No. 3 Shaft
Capped To Code In 2001
October 24, 2000 Bhm # 00-360 For The #3
Crown Shaft Confirms That A New Cap Was
Designed And Constructed As Per The Mndm
Guidelines For Rehabilitation Of Surface Mine
Openings And Sound Engineering Practice
17
476535
5368338
Stope To Surface
Active
Crown Mine Stope:
Fully Contained By Fencing That Must Be Completed
With Code-compliant 6-gauge Fencing For Closure.
Widespread Subsidence Observed Within Fenced Off
Area. Site Investigated And Partially Backfilled In
2004-06. Fenced Area Included A
17
476663
5368338
Tailings - Unconfined
Active
2015 Mndm; Verified Historical Records - Tailings For The Crown Mine Were Approx. 22,600 Tonnes - Very Minimal. Area Is Part Of The Fairway Village Trailer Park And No Visible Signs Of Tailings Exist. These Tailings Were Immediately South Of The Crown Min
Please be aware of the following regarding our AMIS data
The information herein is provided by MINES free of charge and for information purposes only. All information is provided "as is" without warranties or conditions of any kind either expressed or implied. In providing this AMIS database information, MINES and the Government of Ontario accept no liability and make no warranty or any representation regarding the use, accuracy, applicability, completeness, performance, availability , security or reliability of the information. MINES is not responsible for, nor does it independently verify any information, through field measurements or otherwise. It is the sole responsibility of the person choosing to receive and use this information to verify the accuracy of any information obtained from this data package. The reader is warned to under take his or her own independent investigation to validate this information. Reports provided within are not compliant with CSA standards.
Contact
Emilie Trottier Mine Hazards Technical Specialist Mine Rehabilitation Group
Willet Green Miller Center - Level B6
933 Ramsey Lake Road
Sudbury ON P3E 6B5
Email: emilie.trottier@ontario.ca
Phone: 705-280-8658